MY RF-online BMS filexor error

[fatduck]

I try to wirte a bms script to auto extract and convert RF online RFS archive but get error on it!
I can't figure out the problem myself and hope someone can help me!
(Before you suggest to use other tools, I know there are tools for that, I just want to write a bms for it)

Code: Select all

get NUMRES long
savepos OFSTBL
for i = 0 < NUMRES
   goto OFSTBL
   getdstring RESNAME 0x38
   get OFSRES long
   get RESSIZE long
   savepos OFSTBL
   goto OFSRES
   get DDSHDR long
   if DDSHDR == 0x561EC46A
      set DDSNAME RESNAME
      string DDSNAME -= 3
      string DDSNAME += dds
      filexor "\x2e \x80 \x4d \x76 \x2E \xF8 \xD1 \xF0 \xBD \x3F \x86 \x81 \x58 \x2C \x3F \x3F \x2E \x2E \x67 \x6F \x3F \x40 \x3F \x78 \x3C \x3F \xF1 \xC0 \xA5 \xF6 \x3B \x9F \xC1 \x20 \x3F \xD7 \xC8 \xC1 \xE9 \x85 \x86 \xBD \xEF \x56 \x3F \xA1 \xFB \x2E \x87 \x86 \x61 \x4C \x21 \x3B \x4E \xB4 \x78 \x57 \xAE \x97 \x3F \x2E \x4A \x2E \x3F \x4C \x2E \x44 \xCD \xC5 \x5F \xE8 \xE9 \xEC \xEB \xBD \x9E \xBB \xF7 \x6C \x2E \xF2 \xE4 \x2E \x3F \x3F \x97 \x9F \x9D \xB3 \x21 \xB9 \x76 \x65 \x54 \x3F \xE6 \xF6 \xC6 \xF0 \x79 \xDB \xE2 \xB2 \x4B \x2E \x2E \xEB \xD3 \xD3 \xCA \xAB \xEA \xC7 \xED \x9C \xC7 \xD9 \xD0 \x65 \x48 \xB4 \xFA \x35 \x2E \x2E \x6A \x9B"
      #log DDSNAME OFSRES RESSIZE
      log MEMORY_FILE OFSRES 0x80      
      filexor ""
      math OFSRES += 0x80
      math RESSIZE -= 0x80
      append 
      log MEMORY_FILE OFSRES RESSIZE
      append
      math RESSIZE += 0x80
      log DDSNAME 0 RESSIZE MEMORY_FILE
   else
      log RESNAME OFSRES RESSIZE
   endif
next i

edit:
It's actually crash the qucikbms.exe and quit!

[finale00]

What's the error?

[aluigi]

you must add OFSRES after filexor or using the encryption xor command because filexor uses the offset 0 as base offset for the xoring job.
then when if you use the \x notation it's better to not leave spaces, while if you use 0x it's ok as you did.

for the rest I see no errors or problems, everything gets extracted correctly.

the following is the script with the specified correction (so only one line changes):

Code: Select all

get NUMRES long
savepos OFSTBL
for i = 0 < NUMRES
   goto OFSTBL
   getdstring RESNAME 0x38
   get OFSRES long
   get RESSIZE long
   savepos OFSTBL
   goto OFSRES
   get DDSHDR long
   if DDSHDR == 0x561EC46A
      set DDSNAME RESNAME
      string DDSNAME -= 3
      string DDSNAME += dds
      filexor "\x2e\x80\x4d\x76\x2E\xF8\xD1\xF0\xBD\x3F\x86\x81\x58\x2C\x3F\x3F\x2E\x2E\x67\x6F\x3F\x40\x3F\x78\x3C\x3F\xF1\xC0\xA5\xF6\x3B\x9F\xC1\x20\x3F\xD7\xC8\xC1\xE9\x85\x86\xBD\xEF\x56\x3F\xA1\xFB\x2E\x87\x86\x61\x4C\x21\x3B\x4E\xB4\x78\x57\xAE\x97\x3F\x2E\x4A\x2E\x3F\x4C\x2E\x44\xCD\xC5\x5F\xE8\xE9\xEC\xEB\xBD\x9E\xBB\xF7\x6C\x2E\xF2\xE4\x2E\x3F\x3F\x97\x9F\x9D\xB3\x21\xB9\x76\x65\x54\x3F\xE6\xF6\xC6\xF0\x79\xDB\xE2\xB2\x4B\x2E\x2E\xEB\xD3\xD3\xCA\xAB\xEA\xC7\xED\x9C\xC7\xD9\xD0\x65\x48\xB4\xFA\x35\x2E\x2E\x6A\x9B" OFSRES
      #log DDSNAME OFSRES RESSIZE
      log MEMORY_FILE OFSRES 0x80     
      filexor ""
      math OFSRES += 0x80
      math RESSIZE -= 0x80
      append
      log MEMORY_FILE OFSRES RESSIZE
      append
      math RESSIZE += 0x80
      log DDSNAME 0 RESSIZE MEMORY_FILE
   else
      log RESNAME OFSRES RESSIZE
   endif
next i

[fatduck]

Thank you for your help!