XeNTaX

access denied

daemon1 wrote: ↑Mon May 25, 2020 4:48 pm access denied

sorry, fixed

legendhavoc175 wrote: ↑Mon May 25, 2020 5:04 pm sorry, fixed

ok i checked these 3 models, and all their UVs are totally fine, so the problem must be in importer you use to get models from FC4

daemon1 wrote: ↑Mon May 25, 2020 6:39 pm

legendhavoc175 wrote: ↑Mon May 25, 2020 5:04 pm sorry, fixed

ok i checked these 3 models, and all their UVs are totally fine, so the problem must be in importer you use to get models from FC4

i'm very sure it's blender's FBX export
the UVs are fine up until i export to FBX through Blender

legendhavoc175 wrote: ↑Mon May 25, 2020 9:07 pm
i'm very sure it's blender's FBX export
the UVs are fine up until i export to FBX through Blender

I have the same thing until I export to FBX, all right with UV.

Ganic3000 wrote: ↑Mon May 25, 2020 9:21 pm the UVs are fine up until i export to FBX through Blender

Why do you think so? Then show me how UVs look in blender before you export to FBX. Dont show that model picture, it proves nothing. Show the UV map.

I still think the problem is your FC4 importer.

daemon1 wrote: ↑Mon May 25, 2020 9:30 pm I still think the problem is your FC4 importer.

Дело не в самом импортере и не в вашем инструменте как уже можно догадаться, а по не понятной причине, после экспорта из любой версии бляндера в fbx, будто местами вершины у UV смещаются. Такая петрушка с UV и на движке CE5 с импортом fbx.

daemon1 wrote: ↑Mon May 25, 2020 9:30 pm

Ganic3000 wrote: ↑Mon May 25, 2020 9:21 pm the UVs are fine up until i export to FBX through Blender

Why do you think so? Then show me how UVs look in blender before you export to FBX. Dont show that model picture, it proves nothing. Show the UV map.

I still think the problem is your FC4 importer.

it's not the importer, it does the same thing with any model i export to FBX, even with the Far Cry 5 importer, and the Far Cry Primal importer
and we've used 2 different importers for FC4, one for 3DS Max and one for Maya

Ganic3000 wrote: ↑Mon May 25, 2020 9:51 pm а по не понятной причине...

Причина мне лично понятна. Неправильный импортер неправильно читает UV, поэтому после перенесения в UE4 у него не хватает точности, чтобы представить эти неправильные UV.

Варианты:

- исправить импортер
- исправить UV после их чтения неправильным импортером (перенести к центру координат)

legendhavoc175 wrote: ↑Mon May 25, 2020 10:58 pm and we've used 2 different importers for FC4, one for 3DS Max and one for Maya

It means all these importers were made by same people and have same problem

daemon1 wrote: ↑Tue May 26, 2020 5:12 am

legendhavoc175 wrote: ↑Mon May 25, 2020 10:58 pm and we've used 2 different importers for FC4, one for 3DS Max and one for Maya

It means all these importers were made by same people and have same problem

ok, enough bickering about what caused it, i'm sure it was blender
but the important thing is how to fix it?
you said the UV's should be in the grid, can we move them in UE4?

Yes you can. But this will only give you approximately correct uvs. Because after they were broken, theres no way to know how exactly they are different in scale and position.

Proper way would be to fix incorrect importer script, so uvs will be correct in the first place.

legendhavoc175 wrote: ↑Tue May 26, 2020 5:42 am but the important thing is how to fix it?

The only way to properly fix it is to find out what caused it.

legendhavoc175 wrote: ↑Tue May 26, 2020 5:42 am we've used 2 different importers for FC4, one for 3DS Max and one for Maya

Something is missing here. You say it always wrong, even if you use 3dmax or maya, and at the same time you think the problem is blender.
What are those importers you used?

daemon1 wrote: ↑Tue May 26, 2020 9:19 pm

legendhavoc175 wrote: ↑Tue May 26, 2020 5:42 am but the important thing is how to fix it?

The only way to properly fix it is to find out what caused it.

legendhavoc175 wrote: ↑Tue May 26, 2020 5:42 am we've used 2 different importers for FC4, one for 3DS Max and one for Maya

Something is missing here. You say it always wrong, even if you use 3dmax or maya, and at the same time you think the problem is blender.
What are those importers you used?

my workflow is this
i convert XBG to FBX in Maya or 3DS Max, then i go to blender to edit the model and make it the correct size and other adjustments, then i save as FBX in Blender and then import the FBX to UE4

daemon1 wrote: ↑Tue May 26, 2020 9:19 pm

Сам импортер для Майя я качал от сюда.
Как я правильно понял, версия редактора должна быть не менее 2016.
viewtopic.php?p=101460#p101460