XeNTaX

Ok...

Per TheSeekers request...

I have updated both the XML Data Creator and The editor
Editor is at version 30.1.8
XML Data Creator is at version 22

Get them here -> http://209.159.152.184:8080/WoW/

Don't for get to FORCE AN XML UP DATA IN THE EDITOR!!!!

I can't find the Flags for the Panasia ships
It's putting the American ones on them...
I guess you could edit the master XMLs once we figure this out.

I found a way to make the app culture irrelevant.
This means it will always read the files as in the correct number format.
There will be no need to change any settings regarding you computers location in order for it to work.

I up loaded version 30.1.9
http://209.159.152.184:8080/WoW/

Hey Coffee. I have a problem with WoT Model Editor. I run program, all is OK. Than I open .primitives file and part/ship will be opened. But if I wanna to export it in FBX file, there I have a problem. The model of the ship for example is composite of many parts. There is main body of the ship - that's OK, I export it and all is fine. But the second part what called Bow_patch_MidFrontShape I can't export. This part joined main parts of hull and if I try to export it, it shows error (picture) . The next case is part of Tirpitz front superstructure. Do you have any tip what is it? Thanks

http://postimg.org/image/43g05o28j/

987mis wrote:Hey Coffee. I have a problem with WoT Model Editor. I run program, all is OK. Than I open .primitives file and part/ship will be opened. But if I wanna to export it in FBX file, there I have a problem. The model of the ship for example is composite of many parts. There is main body of the ship - that's OK, I export it and all is fine. But the second part what called Bow_patch_MidFrontShape I can't export. This part joined main parts of hull and if I try to export it, it shows error (picture) . The next case is part of Tirpitz front superstructure. Do you have any tip what is it? Thanks

http://postimg.org/image/43g05o28j/

Interesting.
I need the text from the exception thats being thrown.
Not all of it.. just the first 10 lines or so. It will help me figure this out.
I can convert it to English if I know what language it's in.

Coffee:

If you mean the warning "error" table, thats only said, that in aplication is any untreated exception.. Link of the object isn't set on the instance of the object. Thas's all The other text only said what happens if I press continue or exit . But I have a problem with the program from the beginning. If I basicly turn it on , it shows me this waring tables.
http://postimg.org/image/vu00snq67/
BUT I have there 2 modes of start of this program...the first what makes this errors is Integrated graphical processor and the second is NVIDIA high-powered graphical processor and this "mode" starts the program with no errors. I have no idea if it is OK and the program is running good or there are any hiden errors what can make this problem with this export of some parts. I tried to export it in .obj and it gives me error that I didn't choose none object to export. Is there any possibility that I do somethink wrong? For example that the opened model is black - with no textures. But that is no essential for me cause I only need to export model of the ship into 3D sofwhat I used to and redraw it into real curves. The models in WOWS looks good so it is good basis for my use. So I will be very happy if you helped me or said what I do wrong.

Thanks

987mis wrote:Coffee:

If you mean the warning "error" table, thats only said, that in aplication is any untreated exception.. Link of the object isn't set on the instance of the object. Thas's all The other text only said what happens if I press continue or exit . But I have a problem with the program from the beginning. If I basicly turn it on , it shows me this waring tables.
http://postimg.org/image/vu00snq67/
BUT I have there 2 modes of start of this program...the first what makes this errors is Integrated graphical processor and the second is NVIDIA high-powered graphical processor and this "mode" starts the program with no errors. I have no idea if it is OK and the program is running good or there are any hiden errors what can make this problem with this export of some parts. I tried to export it in .obj and it gives me error that I didn't choose none object to export. Is there any possibility that I do somethink wrong? For example that the opened model is black - with no textures. But that is no essential for me cause I only need to export model of the ship into 3D sofwhat I used to and redraw it into real curves. The models in WOWS looks good so it is good basis for my use. So I will be very happy if you helped me or said what I do wrong.

Thanks

The errors in your screenshot are long-standing issues the program has with Intel graphics chips

TheSeeker is correct about the errors at start up.
Most but not all Intel Laptop Video chips are too low power to do anything useful with them.
They use these same Chips on some other boards for desktops. Micro and Mini ATX boards usually have a built in video chip.
Unless you have a good reason to use the on-board video, I would disable it in the BIOS settings and run only your nVidia hardware.

The info I need is the one you posted an image of originally. bottom left button (Details) will open a stack trace. The trace is all I need. I don't need the list of loaded assemblies.

Yes, errors are ok now if I start program with boosted graphic mode

The text is:

System.NullReferenceException: Odkaz na objekt není nastaven na instanci objektu.
v Model_Viewer.modExportImport.add_to_root(Single[]& matrix1, Single[]& matrix2, FbxMesh& mymesh, GKnode_& knode, FbxNode& child_node_, FbxNode& parent_node_, FbxTexture[]& ltextures)
v Model_Viewer.modExportImport.export_fbx_wows()
v Model_Viewer.frmFbx.Start_Export_btn_Click(Object sender, EventArgs e)
v System.Windows.Forms.Control.OnClick(EventArgs e)
v System.Windows.Forms.Button.OnClick(EventArgs e)
v System.Windows.Forms.Button.OnMouseUp(MouseEventArgs mevent)
v System.Windows.Forms.Control.WmMouseUp(Message& m, MouseButtons button, Int32 clicks)
v System.Windows.Forms.Control.WndProc(Message& m)
v System.Windows.Forms.ButtonBase.WndProc(Message& m)
v System.Windows.Forms.Button.WndProc(Message& m)
v System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
v System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
v System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)

Odkaz na objekt není nastaven na instanci objektu -> Link on the object isn't set on the instance of the object. ( or somethink like that it says )

Ok the Language is Slovak.
And it translates to:
Odkaz na objekt není nastaven na instanci objektu.
Object reference not set to an instance of an object.
What this is saying is something is missing.

I can indeed cause this exception if the Game path is set wrong...

This is caused by the textures not being loaded.
If you are getting a plain black ship you have something setup wrong.
Do this..
Start the editor..
Go to the File Menu and set up the editor for the correct mode.
It is important to do these steps in order!
1. Set Editor Mode to WoWs
2. Set Working Path. This should be where the game's resources are located. It should be set to something like "C:\Games\World_of_Warships\res
3. Make sure the game is set to load the ships child models and also to display them.
4. Close the editor so these settings are saved.
5. Restart the editor and check the path and game mode settings to make sure they have been saved and reloaded.
6. If step 5 is correct, the editor should load and display the hull and all its children with textures and lighting. If not.. Something is very wrong. (maybe a shader is not working though its compiling)

I attached a image that shows how the settings should be. Don't forget to set the path to the games resources. This is VERY important!

Aaaah...problem fixed Bad path of recources Thank you Coffee

987mis wrote:Aaaah...problem fixed Bad path of recources Thank you Coffee

You are Welcome!
I'm glad it's working.

Ok...
I have some really good news...
Someone at CURSE sent me a link to some sample code. It is based on some of my old original work BUT.. It has code that converts the packed Uint32 Normals, Tangents and BiNormals in to the correct signed vectors.
This fixes the problem with the normals pointing always up and produces much better lighting on the hull and other objects.
You can get the new 30.1.10 version here http://209.159.152.184:8080/WoW/

Also.. I'm not sure the last build (30.1.9) was effected but I accidentally over-wrote the bump shaders. This is what happens when you are tired an have source open for multiple apps at the same time. Thankfully I have backups and the shaders are fixed.

Version 30.1.10 Master XML is NOT up to date with the game.
If you Must have the new master xmls, download the xml_creator and create and save an updated master xml.
You will need to place it in the \WoWs_Scripts folder where the editor is installed.
Once this is done, start up the editor and do a 'Force Master XML Update".. It is located on the file menu in the editor.

I have been meaning to update WOWs to the latest game version but keep forgetting to start it.
My wife works at home and we share a cable internet connection and I can't download during the day. It freezes her Management software and she can't do her job without it working. I don't play these games anymore for basically the same reason.

Coffee,
I just installed your latest version of viewer. When I load a primitive it loads up as black. What am I missing ?