READ THE RULES: Click here

Follow us on Facebook: https://www.facebook.com/xentax/ :)

XpoZed's Unpakke project

General game file tools that are useful for more than one game
User avatar
XpoZed
veteran
Posts: 144
Joined: Sat Oct 24, 2009 5:08 pm
Location: Bulgaria
Has thanked: 2 times
Been thanked: 45 times
Contact:

Re: XpoZed's Unpakke project

Post by XpoZed » Fri Aug 17, 2012 9:20 am

hyndai wrote:hi, can you updated vis3 again for french version there are a new key :

"d9ef88157bcbcae0" # Deponia french - publish by aluigi

ThX
Done! Can you test it? You will have to replace the "magic" variable in unpakke.ini with "d9ef88157bcbcae0"

hyndai
advanced
Posts: 53
Joined: Tue Jun 03, 2008 9:55 pm
Has thanked: 3 times
Been thanked: 1 time

Re: XpoZed's Unpakke project

Post by hyndai » Fri Aug 17, 2012 7:51 pm

Hi just tested in french release, and no works with key d9ef88157bcbcae0, unpack 0 bytes, because not full md5 ( if i compare with other keys ), and i don't no know how search xor key...

sample of data.vis french (121ko)
https://rapidshare.com/files/4217231988/data-sample.vis

alugui - bmls vis3
http://aluigi.org/papers/bms/visionaire.bms

User avatar
XpoZed
veteran
Posts: 144
Joined: Sat Oct 24, 2009 5:08 pm
Location: Bulgaria
Has thanked: 2 times
Been thanked: 45 times
Contact:

Re: XpoZed's Unpakke project

Post by XpoZed » Tue Aug 21, 2012 5:27 pm

hyndai wrote:Hi just tested in french release, and no works with key d9ef88157bcbcae0, unpack 0 bytes, because not full md5 ( if i compare with other keys ), and i don't no know how search xor key...

sample of data.vis french (121ko)
https://rapidshare.com/files/4217231988/data-sample.vis

alugui - bmls vis3
http://aluigi.org/papers/bms/visionaire.bms
Open unpakke.ini and set the "magic" value to "d9ef88157bcbcae0d9ef88157bcbcae0" instead of "d9ef88157bcbcae0"

strizek
n00b
Posts: 19
Joined: Fri Apr 06, 2012 7:34 pm
Has thanked: 1 time

Re: XpoZed's Unpakke project

Post by strizek » Wed Sep 12, 2012 8:02 pm

Hi, i have big problem with Unpakke prog. I have two versions of A new beginning game - ENG and GER game and when i use unpakke old version, then after unpack/pack (without changes in xml), output file is smaller and game wont run. When i use newest version of unpakke, then when i try to unpack vis files, then UNKNOWN version appears and files have 0bytes. Same problem is with game Harveys neue augen. Please help me.

http://www.ulozto.cz/x625FUf/pack-zip This link contains Eng data.vis, Ger data.vis, old unpakke, newest unpakke for A new beginning.
http://www.ulozto.cz/xvXhS6S/te-zip This link contains Ger data.vis file for Harveys neue augen


thank you

User avatar
XpoZed
veteran
Posts: 144
Joined: Sat Oct 24, 2009 5:08 pm
Location: Bulgaria
Has thanked: 2 times
Been thanked: 45 times
Contact:

Re: XpoZed's Unpakke project

Post by XpoZed » Thu Sep 13, 2012 9:36 am

strizek wrote:Hi, i have big problem with Unpakke prog. I have two versions of A new beginning game - ENG and GER game and when i use unpakke old version, then after unpack/pack (without changes in xml), output file is smaller and game wont run. When i use newest version of unpakke, then when i try to unpack vis files, then UNKNOWN version appears and files have 0bytes. Same problem is with game Harveys neue augen. Please help me.

http://www.ulozto.cz/x625FUf/pack-zip This link contains Eng data.vis, Ger data.vis, old unpakke, newest unpakke for A new beginning.
http://www.ulozto.cz/xvXhS6S/te-zip This link contains Ger data.vis file for Harveys neue augen


thank you
Download the latest VIS3 module that includes "unpakke.ini"
Open "unpakke.ini" and check the "magic" value. There is a list of magic codes for all the supported games in the file. Take the "A new beginning" hash and replace the magic value with it.
Now try to unpack the files again and they should have no problems (I've already tried ;)).

strizek
n00b
Posts: 19
Joined: Fri Apr 06, 2012 7:34 pm
Has thanked: 1 time

Re: XpoZed's Unpakke project

Post by strizek » Tue Sep 18, 2012 5:13 pm

Hello again. No success. Still unknown file and then 0byte file.

i call prog with this: unpakke upkk_vis3 unpack data.vis scene
right id is set up - so in previous attempts.

Please, download my files (check harveys neue augen auch - for right ID) and tell me, what i do wrong.

User avatar
XpoZed
veteran
Posts: 144
Joined: Sat Oct 24, 2009 5:08 pm
Location: Bulgaria
Has thanked: 2 times
Been thanked: 45 times
Contact:

Re: XpoZed's Unpakke project

Post by XpoZed » Tue Sep 18, 2012 8:31 pm

strizek wrote:Hello again. No success. Still unknown file and then 0byte file.

i call prog with this: unpakke upkk_vis3 unpack data.vis scene
right id is set up - so in previous attempts.

Please, download my files (check harveys neue augen auch - for right ID) and tell me, what i do wrong.
Like i said, you need to download upkk_vis3.dll again, including the unpakke.ini file in the same archive.
Then use:

Code: Select all

unpakke upkk_vis3.dll unpack data.vis scene
I try it myself and it did work for both files (German and English version).

User avatar
XpoZed
veteran
Posts: 144
Joined: Sat Oct 24, 2009 5:08 pm
Location: Bulgaria
Has thanked: 2 times
Been thanked: 45 times
Contact:

Re: XpoZed's Unpakke project

Post by XpoZed » Sat Sep 22, 2012 5:27 pm

h1210591 wrote:Hello,

I successfully unpacked files from data.vis and I got many .ogg and .png files. Ogg files works great, but I cannot open or edit png files. Any suggestion?

Thx
Read this: http://www.nullsecurity.org/article/a_n ... png_fixing

User avatar
XpoZed
veteran
Posts: 144
Joined: Sat Oct 24, 2009 5:08 pm
Location: Bulgaria
Has thanked: 2 times
Been thanked: 45 times
Contact:

Re: XpoZed's Unpakke project

Post by XpoZed » Mon Sep 24, 2012 11:33 am

h1210591 wrote:
XpoZed wrote:
h1210591 wrote:Hello,

I successfully unpacked files from data.vis and I got many .ogg and .png files. Ogg files works great, but I cannot open or edit png files. Any suggestion?

Thx
Read this: http://www.nullsecurity.org/article/a_n ... png_fixing
I have problem with compile the code. And is there any faster solution than passing through the pictures one by one? And one more question - Where are the actual texts to translate? In these png files?

Thx
The link i give you about fixing the png's is just an solution example. If you need to fix all the PNG's at once, you have to implement your own tool, using my technique. As much as i remember there was a tool already from some guy on the forums here, and was written for the game "A new beginning". However i think it might work without any problem for "Deponia" and other games using VIS3.
The text strings are located in the only one .XML file stored in data.vis (the largest file there, should be around 40-50MBs)

strizek
n00b
Posts: 19
Joined: Fri Apr 06, 2012 7:34 pm
Has thanked: 1 time

Re: XpoZed's Unpakke project

Post by strizek » Wed Sep 26, 2012 5:49 pm

XpoZed wrote:
strizek wrote:Hello again. No success. Still unknown file and then 0byte file.

i call prog with this: unpakke upkk_vis3 unpack data.vis scene
right id is set up - so in previous attempts.

Please, download my files (check harveys neue augen auch - for right ID) and tell me, what i do wrong.
Like i said, you need to download upkk_vis3.dll again, including the unpakke.ini file in the same archive.
Then use:

Code: Select all

unpakke upkk_vis3.dll unpack data.vis scene
I try it myself and it did work for both files (German and English version).
i newly downloaded latest version, as you described - no success, still same problem. Could you please upload somewhere to server working combination of unpakke with right dll files ? I want to check your package.

Thank you

User avatar
XpoZed
veteran
Posts: 144
Joined: Sat Oct 24, 2009 5:08 pm
Location: Bulgaria
Has thanked: 2 times
Been thanked: 45 times
Contact:

Re: XpoZed's Unpakke project

Post by XpoZed » Fri Sep 28, 2012 8:14 am

strizek wrote:
XpoZed wrote:
strizek wrote:Hello again. No success. Still unknown file and then 0byte file.

i call prog with this: unpakke upkk_vis3 unpack data.vis scene
right id is set up - so in previous attempts.

Please, download my files (check harveys neue augen auch - for right ID) and tell me, what i do wrong.
Like i said, you need to download upkk_vis3.dll again, including the unpakke.ini file in the same archive.
Then use:

Code: Select all

unpakke upkk_vis3.dll unpack data.vis scene
I try it myself and it did work for both files (German and English version).
i newly downloaded latest version, as you described - no success, still same problem. Could you please upload somewhere to server working combination of unpakke with right dll files ? I want to check your package.

Thank you
I told you I've used unpakke and upkk_vis3.dll downloaded from the site. Make sure you have the right unpakke.ini in your unpakke directory, and the magic value is the correct one.

mappy2012
advanced
Posts: 62
Joined: Sun Jul 03, 2011 4:40 am
Has thanked: 51 times
Been thanked: 1 time

Re: XpoZed's Unpakke project

Post by mappy2012 » Thu Oct 18, 2012 8:28 am

hi,XpoZed.i find upkk_vis3_1.3 no work Edna & Harvey: Harvey's New Eyes
vis3 file,need help thx!!!

Moo
n00b
Posts: 16
Joined: Wed Jul 25, 2012 12:04 am
Has thanked: 1 time
Been thanked: 4 times

Re: XpoZed's Unpakke project

Post by Moo » Fri Oct 19, 2012 5:15 am

Key for Edna & Harvey: Harvey's New Eyes demo (English/Steam) = 00148ff19c9a5fc400148ff19c9a5fc4
May be same for full game.

Fei3
ultra-n00b
Posts: 7
Joined: Sat Aug 27, 2011 2:45 pm
Has thanked: 2 times

Re: XpoZed's Unpakke project

Post by Fei3 » Sun Oct 21, 2012 11:12 am

Moo wrote:Key for Edna & Harvey: Harvey's New Eyes demo (English/Steam) = 00148ff19c9a5fc400148ff19c9a5fc4
May be same for full game.
How can I use it?

Moo
n00b
Posts: 16
Joined: Wed Jul 25, 2012 12:04 am
Has thanked: 1 time
Been thanked: 4 times

Re: XpoZed's Unpakke project

Post by Moo » Sun Oct 21, 2012 11:19 am

Fei3 wrote:How can I use it?
Read the rest of the topic...
See unpakke.ini from upkk_vis3.

Post Reply