Page 40 of 56

Re: ARchive_neXt

Posted: Mon Mar 27, 2017 2:10 pm
by ravenov
o0Crofty0o wrote:It loads without error for me :)
In archive_next, after exporting the obj, make it load any texture. The error in blender appears when it cannot access the .mtl (comes with .obj) file because archive_next still uses it in some way. If you just click on any texture and then try to import the obj again in blender it should work.
10/10 :up:
i'm a f*****g idiot :[

-now problem with normal maps (high resolution)
i checked many files like this one, where normal map are in high resolution or maybe not !?

Image

Re: ARchive_neXt

Posted: Mon Mar 27, 2017 4:32 pm
by HeliosAI
On those textures that display as 'Bad Image' use the first export option:
Image
It will give you a dx10 .dds file, which cannot be opened with most usual programs. Use Noesis to view and convert it ^_^

Re: ARchive_neXt

Posted: Mon Mar 27, 2017 4:57 pm
by ravenov
o0Crofty0o wrote:On those textures that display as 'Bad Image' use the first export option:
Image
It will give you a dx10 .dds file, which cannot be opened with most usual programs. Use Noesis to view and convert it ^_^
20 hours without sleeping :zzz:
thanks Dude again

Re: ARchive_neXt

Posted: Mon Mar 27, 2017 5:00 pm
by HeliosAI
No Problem, glad i can help :)

Re: ARchive_neXt

Posted: Mon Mar 27, 2017 5:32 pm
by ravenov
o0Crofty0o wrote:No Problem, glad i can help :)
thanks man :wink: :wink: , infinit issues today, map displaced ?! i inverted the UV's and there is this map Offset
Image

same problem for Normal/Spec/Gloss/Diff

Re: ARchive_neXt

Posted: Mon Mar 27, 2017 5:35 pm
by HeliosAI
Which model is that?

Re: ARchive_neXt

Posted: Mon Mar 27, 2017 5:36 pm
by ravenov
o0Crofty0o wrote:Which model is that?
WG_ASR_ACR_Stock_LOD0

you can find it in DataPC_extra.forge

Re: ARchive_neXt

Posted: Mon Mar 27, 2017 6:04 pm
by MichaelDarkAngel
o0Crofty0o wrote:On those textures that display as 'Bad Image' use the first export option:

It will give you a dx10 .dds file, which cannot be opened with most usual programs. Use Noesis to view and convert it ^_^
Those are the same images that are causing your issue when trying to view models. Which means texconv is not doing its job. I'll see if I can bypass that, the model viewer only uses the diffuse map but all textures get created at the same time.

Re: ARchive_neXt

Posted: Mon Mar 27, 2017 6:17 pm
by MichaelDarkAngel
striking wrote:Thank you MichaelDarkAngel.

I tried to use it for Rainbow with the UltraHD Textures installed
The result changes randomly after I select a different texture and switch back.
Did anyone get similar images ?

I think that the resources are at different offsets compared to the version you used (and hopefully
not in a different format).
Is there an option to search for all resources without matching them to the stored indices ?
Noticed this issue yesterday when I started digging into the RSS files. 2 problems, first is something I forgot to do for this release, second is with the images themselves.

I could release a fix for the first problem, but that wouldn't fix images that are used for textures.

Going to work on getting the textures to work properly first.

Re: ARchive_neXt

Posted: Mon Mar 27, 2017 6:33 pm
by ravenov
o0Crofty0o wrote:Which model is that?
i'm trying...with this UV's

Image

Re: ARchive_neXt

Posted: Mon Mar 27, 2017 6:42 pm
by HeliosAI
MichaelDarkAngel wrote: Those are the same images that are causing your issue when trying to view models. Which means texconv is not doing its job. I'll see if I can bypass that, the model viewer only uses the diffuse map but all textures get created at the same time.
Hmm, i'm not entirely sure this is the issue as usually all textures for most models display correctly in Archive next itself (normal maps aswell), but the models still throw the error when trying to preview them.
ravenov wrote: i'm trying...with this UV's

[img]http://orig11.deviantart.net/ad9c/f/201 ... b3qazj.png[/ig]
I cannot check the model right now because i'm not home, but from the picture it looks like you just need to move the UV upwards a little bit.

Re: ARchive_neXt

Posted: Mon Mar 27, 2017 6:52 pm
by ravenov
o0Crofty0o wrote:
MichaelDarkAngel wrote: Those are the same images that are causing your issue when trying to view models. Which means texconv is not doing its job. I'll see if I can bypass that, the model viewer only uses the diffuse map but all textures get created at the same time.
Hmm, i'm not entirely sure this is the issue as usually all textures for most models display correctly in Archive next itself (normal maps aswell), but the models still throw the error when trying to preview them.
ravenov wrote: i'm trying...with this UV's

Image
I cannot check the model right now because i'm not home, but from the picture it looks like you just need to move the UV upwards a little bit.
maybe scaling it is better, bcs when i move it upwards it's the same problem

quick scale/ not perfectly donne
Image
set the Uv's in the middle and scale or set Uv's in a good corner of the map and Scale a little bit

Re: ARchive_neXt

Posted: Mon Mar 27, 2017 7:08 pm
by MichaelDarkAngel
o0Crofty0o wrote:
MichaelDarkAngel wrote: Those are the same images that are causing your issue when trying to view models. Which means texconv is not doing its job. I'll see if I can bypass that, the model viewer only uses the diffuse map but all textures get created at the same time.
Hmm, i'm not entirely sure this is the issue as usually all textures for most models display correctly in Archive next itself (normal maps aswell), but the models still throw the error when trying to preview them.
For whatever reason, texconv is not doing what its supposed to do, that causes ARchive_neXt to crash and not finish writing the model file. The incomplete model file never gets loaded. I'm pretty sure I'm right about this.

What I don't know is why texconv isn't working. Could be a permissions issue, but that's just a guess.

Re: ARchive_neXt

Posted: Tue Mar 28, 2017 1:52 am
by MichaelDarkAngel
MichaelDarkAngel wrote:For whatever reason, texconv is not doing what its supposed to do, that causes ARchive_neXt to crash and not finish writing the model file. The incomplete model file never gets loaded. I'm pretty sure I'm right about this.
Confirmed and bypassed with error handling that informs you of the failed DX10 conversion. Thus allowing ARchive_neXt to finish writing the model file and properly load it for viewing. Still not sure why texconv is not working for those with this issue. The only way I could replicate the error was to remove texconv from the installation directory.

Now to try and resolve the Rainbow Six Siege image issue...

Re: ARchive_neXt

Posted: Tue Mar 28, 2017 4:20 am
by GHOST DEAD
MichaelDarkAngel wrote:
MichaelDarkAngel wrote:For whatever reason, texconv is not doing what its supposed to do, that causes ARchive_neXt to crash and not finish writing the model file. The incomplete model file never gets loaded. I'm pretty sure I'm right about this.
Confirmed and bypassed with error handling that informs you of the failed DX10 conversion. Thus allowing ARchive_neXt to finish writing the model file and properly load it for viewing. Still not sure why texconv is not working for those with this issue. The only way I could replicate the error was to remove texconv from the installation directory.

Now to try and resolve the Rainbow Six Siege image issue...
MichaelDarkAngel... i want translate assassins creed games
can you help me zbout text and font files? and forge file?